As we all know that the main constituent of the body. The world is developing so fast; the increment in technology has led to many consequences. The main problem is pollution that is overwhelming for the whole world. Due to an increase in pollution, people are unable even to get clean water for basic needs and drinking purposes. Clean and healthy water is necessary for the survival of living species. The thing that matters the most is to know about how to filter water? The whole article will guide you about this.
Is There Any Need To Purify Water?
No doubt, water is the essential element for the survival of living beings. Anyone skill to survive happily in the world would be using filtered water and knowing how to filter it. The tap water contains certain contaminants more than a particular limit. Because of this consequence, tap water has been considered unsafe for drinking purposes. It is recommended that tap water should be boiled before drinking. Many pesticides, harmful metals, bacteria, and viruses are also present in tap water. These are the things that may affect your health in a very drastic way. Most of the chemicals released in the water contain chlorine too, which will lead to unpleasant changes in our body and damage our health. So the health agencies and the utilities have guided to filter water properly before it is used for drinking purposes.
8 Best Ways To Filter Tap Water
Purifying water at home can be very convenient, so here is the list of methods you can use to filter tap water at your home without any concern.
1. Boiling
This is one of the simplest and easiest methods you will ever find to filter the tap water. All you have to do is to heat the water on the stove. Boiling tap water may remove all the unnecessary oxygen from it, thus making it fit for drinking with end up lasting flat taste. To increase the mineral, you can also add a pinch of salt to it to make its taste better.
2. Slow Sand filtration
Another best way to filter water at home is by slow sand filtration. Farmers have employed this for many years in order to use purified water. Slow sand filtration doesn’t mean using sand itself to purify water, but to use a gel-like solution for filtering water. There are sand filters for this purpose; however, the rate of filtration by the sand filters is quite low, and also an optimal land area is needed for the treatment of water.
3. Bleaching
Bleaching of drinking water may sound odd, but it is also a method that is used for emergency water treatment. As it is a chemical so treating water with it can be dangerous, so one must have to follow instructions carefully for ensuring proper safety. Make sure to use a soap-free and scentless bleach and use a new medicine dropper to put it into the water. There are particular qualities of bleach for the treatment of a certain amount of water. After mixing bleach in it let it settle down for an hour, use the water from the tap for drinking.
4. Using liquid iodine and iodine tablets
A very small amount of iodine can be used to purify tap water and kill toxins. Likewise bleach, iodine is also a chemical, so it can be used only for short term treatment. You can use a dropper to add about 2 to 5 drops of liquid iodine in water. After adding iodine, let the liquid settle down for about thirty minutes. Now shake well before drinking.
5. Solar disinfection
When boiling water is impossible, you can use this method to clean water by exposing it to the sun. As direct heat is used in this process, so this solar heat from the sun may lead to aid in purifying the contaminants in the water. In order to achieve success during this method, all you will need is bottles, impurities containing water, and strong sunlight. Fill the bottles for up to 3 to 4 quarters and leave them for about 6 to 7 hours in sunlight.
6. Using ultraviolet light
The ultraviolet method is the most convenient way to kill the virus and bacteria in water. It is one of the best and easiest method to use for cleaning water. All you have to do is to swish ultraviolet light in the water for a few minutes so that it would kill the bacteria and viruses completely. One drawback is that the solid particles are not filtered; you have to use filters for this purpose.
7. Use of filters
The use of water filters can remove all the contaminants and additionally, the bacteria from it. Carbon in the water filters can help you to get rid of the chemicals and unpleasant taste. The taste of water is also improved to a noticeable extent. This treated water can be consumed immediately after the treatment. One thing that you have to do time to time is to clean the filters after few weeks and replacing them after cleaning gallons of water. Check for Best Whole House Water Filter in details.
8. Distillation
It is one of the oldest methods to treat water. It includes exposing water to exceptionally high temperatures converting water into vapors. These vapors are then again converted into liquid water. The main aim of distillation is to remove minerals, microorganisms, and chemicals at a very high boiling point.
Final Thoughts
The above techniques for purifying water has made it easier to purify and clean water ready at your home. Using purified water not only enhances your health but also improves the taste and quality of water, so who will not want to enjoy purified water? For this try some of the above methods for getting clean water and enjoy a healthy life. More over if your conscious and worried to remove iron from well water than you may go through in details about Cheapest Ways to Remove Iron from Well Water.
